ametrine pendant – Argentium silver marquise waves
This is a marquise shaped Ametrine – 30.0 carats – checkerboard cut – IF (internally flawless).
I made a generous sized bail -for this pendant so this beautiful stone can also be worn on a heavier chain or even a collar.
The pendant is 5.8 cm long and x 3.0 cm wide.
Weight of this piece is 19.1 grams.
WATER * I Change * FLOWING FORMLESSNESS – Transformative – Playful – Balance – Passionate
The chain included with this pendant is sterling silver 1.15 mm box chain – 18 ” long.
Argentium Silver is a high quality silver with a silver content of 940. It has the unique feature of having a small amount of Germanium added. Argentium Silver is whiter, harder and slower to tarnish. And it is always nickel-free.
For the ‘waves’ design (in the Water Design group) I start by imprinting Argentium silver sheet with sand – for a nice beach texture. Then cut the shape I want from the sheet of silver.
Next, with the softest torch, I roll the edges of the sand-textured silver. I carefully and gently melt the edge, just until the silver begins to ‘roll’.
Once I have the soft edges done, I lay out silver waves and granules, to mimic the water and pebbles of a beach shore, and then fuse them permanently in place.
I then make a bezel wall to exactly fit the gemstone. This is soldered to the base plate. And I attach a bail for the pendant to hang on a chain. Or, for some larger stones – I will solder in place prongs to set the gemstone.
With one final check, I make sure the shape is perfect, and I polish out any scratches or marks from the work process. Then I tumble for work hardening and polishing.
Argentium silver has one extra step. It must be heated. This brings the Germanium to the surface to protect the silver – slowing down tarnish and creating a very white, scratch resistant surface.
The Argentium silver has been textured, cut to shape, edges rolled, waves and granules fused on, bezel attached, bail soldered on, polished, work hardened and baked.
Now the silver is ready for the gemstone to be set. To set this stone I make sure the prongs are exactly the right height, then I carefully bend the silver prong over the stones edge.
A final polish to smooth out the bezel edge and make the silver ‘mirror finish’ shiny, and the pendant is ready to be enjoyed for years to come.
