lavender topaz earrings – chandelier – Argentium silver
Lavender Purple Topaz teardrops accent a chandelier earring in the Water design group. I have created a rectangle shaped, water panel with a fluid, wavy edge. Then added silver waves and pebbles. The black colour is a permanent antique finish on solid Argentium silver.
Earrings are 5.6 cm long by 2.4 cm wide.
They weigh 6.6 grams.
WATER * I Change * FLOWING FORMLESSNESS – Transformative – Playful – Balance – Passionate
Argentium Silver is a high quality silver with a silver content of 940. It has the unique feature of having a small amount of Germanium added. Argentium Silver is whiter, harder and slower to tarnish. And it is always nickel-free.
For the ‘waves’ design (in the Water Design group) I start by imprinting Argentium silver sheet with sand – for a nice beach texture. Then I cut out matching shapes of silver for an earring pair. I always make my earrings in pairs, so that the final earrings are a ‘mirror’ pair – a left and right earring.
Next, with the softest torch, I roll the edges of the sand-textured silver pieces. I carefully and gently melt the edge, just until the silver begins to ‘roll’.
Once I have the soft edges done, I can lay out silver waves and granules to mimic the water and pebbles of a beach shore, and fuse them in place.
Then I like to ‘dap’ these little silver pieces. I gently shape the silver into a cup or dome, making the silver three dimensional, instead of flat.
For post earrings I solder on 20 gauge Argentium silver wire. This is the standard post thickness and fits the Argentium silver butterfly perfectly.
For a dangle earring I either drill a hole for the ear wire, or solder on a connecting loop, with which to attach either ear wires or gemstone dangles.
Argentium silver has one extra step. It must be heated. This brings the Germanium to the surface to protect the silver – slowing down tarnish and creating a very white, scratch resistant surface.
I make sure the silver is perfect, and polish out any scratches or marks from the work process. Then I tumble for work hardening and to polish.
These Argentium silver pieces have been textured, edges rolled, waves and granules fused on, dapped, polished, work hardened and baked.
And finally, the silver earrings are ready for gemstones.
Every earring goes through this entire process. It is one of my favourite designs and I enjoy making them.
